Typical Properties of Style SSC Ensolite Closed Cell Sponge
Description: ENSOLITE SSC closed cell sponge is a blend of PVC/Nitrile polymers. ENSOLITE SSC has uses in sealing and gasketing applications that require a medium compression deflection. SSC has good shock absorption properties and a lower than normal compression set. This closed cell foam has minimal water absorption and a service temperature of -40°F to +200°F. SSC is rated as 2C2 under ASTM D1056-07 and meets the Federal FMVSS-302 rating.
ENSOLITE SSC closed cell PVC/Nitrile sponge is a medium density material. SSC is optimized for shock absorption, but can also be used in gasket and seal strip applications. All ENSOLITE products can be supplied with or without adhesive backing in full rolls up to 60" wide, or slit rolls as narrow as ¼". We can die cut or waterjet cut parts to your exact specifications.
| POLYMER |
|---|
| PVC/NITRILE |
| SPECIFICATIONS | |
|---|---|
| ASTM D 1056-68 | SCE42 |
| ASTM D 1056-85, 91, 98, 07 | 2C2 |
| ASTM D 1056 Suffix’s | B2, C1, F1, M |
| FLAMMABILITY SPECIFICATIONS | |
|---|---|
| FMVSS-302 | PASS |
| Physical Property | Test Method | Unit of Measure | Result |
|---|---|---|---|
| COMPRESSION DEFLECTION @25% | ASTM D 1056 | psi kPa |
7 +/- 2.0 48 +/- 14 |
| DENSITY | ASTM D 3575 | pcf g/cm3 |
12.5 +/- 2.5 .20 +/- .04 |
| 50% COMPRESSION SET | ASTM D 1056 | % | 20 MAX |
| WATER ABSORPTION | ASTM D 1667 | lb/ft² | 1 MAX |
| LOW TEMPERATURE | N/A | °F | -40°F -40°C |
| HIGH TEMPERATURE | N/A | °F | 200°F 92°C |
| TENSILE STRENGTH | ASTM D 412 (DIE A) |
psi kPa |
100 689 |
| HEAT AGING (7 DAYS –158°F) CHANGE IN COMP. DEFL |
ASTM D 1056 | % MAX CHANGE | +/- 30 |
| COLOR | N/A | N/A | GRAY |
This information is furnished as a guide for selecting materials. Atlantic Gasket Corp. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining suitability of material for a particular application.
Click here to download a specification Word document.