Thermoseal C-8200 is a compressed fiber material with good chemical and oil-fuel resistance. C-8200 is manufactured from synthetic fibers with a Hypalon binder system and is an acid resistant gasket material for high temperature applications seeing temperatures up to 400°F (204°C) and for sealing gases and steam at temperatures up to 300°F (148°C). This material is typically used as a gasket or seal for compressors, pipe flanges, manways, pumps and valves in applications that require an acid resistant material.
Thermoseal C-8200 is available in sheets 60" x 78" square in the following thickness: 1/32", 1/16" and 1/8". If required, Atlantic Gasket will gladly die-cut or waterjet cut parts to your exact dimensions and can ship finished parts the same day if needed.
Meets ASTM F104 F712100B5E22K6M5
|Physical Properties||Test Method||Typical Valve|
|Creep Relaxation (.031")||ASTM F38B||30%|
|Sealability (.031")||ASTM F37A||<0.30 ml/hr.|
|Gas Permeability||DIN 3535/6||<0.5 ml/min.|
|Recovery (min.)||ASTM F36J||50%|
(After Immersion in Fuel B for 5 hrs. at 73 F (C))
|ASTM F 146||10% (max.)|
|Thickness Increase ASTM F146
After immersion in:
|ASTM Oil 1 5h/300°F (149°C)
ASTM Oil IRM903, 5h/300°F (149°C)
ASTM Fuel A 5h/73°F (23°C)
ASTM Fuel B 5h/73°F (23°C)
|Dielectric Strength||ASTM D149-95a||9 kV/mm|
|Density||ASTM F1315||106 pcf. (1.7 g/cc)|
|Leachable Chloride Content||FSA Method (Average)||N/A|
This information is furnished as a guide for selecting materials. Atlantic Gasket Corp. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining suitability of material for a particular application.
Click here to download a specification PDF document.